Importing CCS 3.3 Project

jc-ti

Other Parts Discussed in Thread: OMAP-L138

I'm importing a working CCS3.3 project but I get the following error when importing to CCS 5.1:

!ERROR: Unknown device 'TMS470R2x'!

I've attached the CCS3.3 project to try. It is under OMAP-L138_FlashAndBootUtils_2_31\OMAP-L138\CCS\NANDWriter

Thanks!

Jeff

OMAP-L138_FlashAndBootUtils_2_31_a.tar.gz

over 14 years ago

0 Ki over 14 years ago

TI__Guru**** 482221 points

Hi Jeff,

Was the pjt file generated outside of CCS? When CCSv3.3 generates the pjt, it would have CPUFamily as 'TMS470R2X'. In the pjt file you have attached, it is 'TMS470R2x'. While the lower case 'x' is not an issue with 3.3, it looks like it causes problems in v5.1

0 jc-ti over 14 years ago in reply to Ki

TI__Mastermind 27585 points

Great! Yes it was generated outside of CCS. I changed the letter and it built properly. Thanks!

Jeff

Code Composer Studio™︎

Code Composer Studio forum

Importing CCS 3.3 Project