• State TI Thinks Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 2 answers
  • Subscribers 53 subscribers
  • Views 113 views
  • Users 0 members are here
Support feedback
Options
Options

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCD3138A: UCD3138A - CCS

Amath FAYE
Prodigy 30 points
Part Number: UCD3138A
Other Parts Discussed in Thread: UCD3138

Tool/software:

  1. Hello,

I'm trying to get started with the UCD3138, following the video and after importing the Lab 1 project, on properties I don't find the same functions as on the video.

Thanks in advance

 

below what I have in tutorials

  • 0
    Prodigy 30 points

    And when I build it, below the error:

    **** Build Finished ****
    Buildfile generation error occurred..
    This project was created using a version of compiler that is not currently installed - 5.2.7 [Arm].
    Build stopped..

  • 0 in reply to Amath FAYE
    TI__Intellectual 2370 points

    Hi Amath,

    1. From project properties (by right click on project in project explorer) - please ensure the correct configuration is selected.
    2. Select correct core.
    3. Select compiler version TI v5.2.7 [TI v5.2.9].

    If you do not have this compiler version in the dropdown list - Go to Help>Install Code Generation Compiler Tools>TI Compiler Updates… select the required versions and keep clicking “Next” to install it. Then restart the PC.

    If you have a related question, click on "Ask a related question", and if you have another question, "Ask a new question" and post your question.

    Regards
    Hemanth

  • 0 in reply to Hemanth Sreeperumbudur
    Prodigy 30 points

    Hermanth,
    I don't have the compiler:

    And in Help > I don't have the option "Install Code Generation Compiler Tools", below what I have:

      

    And when I click on Check for Updates.. this is the result:

    And I can't select.

    Thanks 

  • 0 in reply to Amath FAYE
    TI__Intellectual 2370 points

    Amath,

    Please use Code Composer Studio that support UCD3138 family - CCSTUDIO IDE, configuration, compiler or debugger | TI.com.

    Please go through the introduction document Introduction to UCD3138x Devices in full for getting started with UCD3138 and more resources.

    Regards
    Hemanth