Memory Image

Stepanov

Other Parts Discussed in Thread: CCSTUDIO

Hello!

I am a novice in CCStudio. I have CCStudio 3.3, XDS560PLUS, Davinci. Tell me please. Is it possible to read, and then write data to the NAND? I want to reserve the data. I want to make a Memory Image.

Maybe there is a good article.

In CCStudio there is one thing: File-> Data-> Load and File-> Data-> Save.

Perhaps this is what I need. But I do not want to risk it.

over 14 years ago

AartiG over 14 years ago

TI__Guru**** 173310 points

Sorry about the late reply to your question.

You didn't mention the specific device you are using, but in general, you cannot write directly to NAND flash using File->Data->Load. You should be able to save flash memory using File->Data-Save but cannot load directly that way.

If you're looking for specific projects/software to Flash NAND, please post your question to the device forum for the specific device you are using as they should be able to help better with that question.

Please also see this related thread: http://e2e.ti.com/support/dsp/davinci_digital_media_processors/f/99/t/62562.aspx

Code Composer Studio™︎

Code Composer Studio forum

Memory Image