LAUNCHXL-CC26X2R1: LAUNCHXL-CC26X2R1 Launchpad program flash error

Hi Ravi,

Make sure all of the header row jumpers are connected and try performing a Mass Erase with Uniflash or Flash Programmer 2.  Has this LaunchPad ever been programmed before?  Do you have any other LaunchPads you can test?

Regards,
Ryan

getting this error in uniflash,  Error connecting to the target: (Error -242 @ 0x0) A router subpath could not be accessed. The board configuration file is probably incorrect. (Emulation package 20.1.0.3372)

getting error on 2 new boards.. have done it one year back, not sure about board sdk version. Not able to do this in new boards. Default led and power jumper is connected.

do i need to connect xds debugger ?, last time i was able to program directly by connecting the board through usb no external connection was done.

Yes, as there is currently no connection between your computer and the CC2652R1 except for ground.  The last time you programmed you had the JTAG headers populated.

Regards,
Ryan

no i connected usb only last time, anyway i will try with debugger also, are you reffering to connection below.

Thanks for supporting.

not resolved still