XDS-510 with Stellaris

David J Schmidt

Intellectual 365 points

Does the XDS-510 support SWD for debugging Stellaris or must you use the 20 pin ARM JTAG connection?

over 14 years ago

0 Lisa TI over 14 years ago

TI__Guru*** 130875 points

Hi David,

have a look at this wiki and let us know if it helps. There are adapters as well as a further information available on our wiki site.

http://processors.wiki.ti.com/index.php/How_to_setup_CCSv4_with_Spectrum_Digital_XDS510USB_PLUS_for_TI_Stellaris_M3

http://processors.wiki.ti.com/index.php/Stellaris_support_in_CCS

I hope this helps!

Best Regards,
Lisa

0 David J Schmidt over 14 years ago in reply to Lisa TI

Intellectual 365 points

Unless I am missing something. There is no mention of SWD support anywhere in the posted links. Therefore, let me rephrase the question. Does the XDS510 support ARM SWD?

0 desouza over 14 years ago in reply to David J Schmidt

TI__Guru**** 171729 points

No. XDS-class emulators only support full JTAG.

Cheers,

Rafael

Code Composer Studio™︎

Code Composer Studio forum

XDS-510 with Stellaris