MSPM33-SDK: Example for EEPROM management

Hello Erik,

thanks for your response

I create the EEPROM project from M0, and integrate in mine project, the problem is the SW scratchs at the first "DL_FlashCTL_unprotectSector" instruction.

Are you sure the management is exactly the same between M0 and M33 ?

In fact, the SW goes directly in "Default_Handler", is it possible to know which interruption is called ?

Have a nice day

Sebastien

Hi Sebastien,

The flash controller is slightly different between the mspm0 and mspm33. you would have to double check how the flash API's are called in the example.

Sicnerely,
Erik Vaughn

Hello Erik,

do you know where I can check the flash API's management ?

Thanks

Hi Sebastien,

We have a handful for flashctl examples please see screenshot below from the latest SDK:

Sincerely,
Erik Vaughn

Hello Erik,

thanks

Do you know, when the EEPROM management examples for MSPM33C321A will be available ?

Have a nice day

Hello Erik,

it is very late for me. I try to integrate samples from M0 with flash management from M33, the SW goes further but the SW  always finishs  in "Default_Handler".

Have a nice day

Sebastien

Hi Sebastien,

Since the flash controllers are different they will cause some issues and lead to the hard fault as you have seen. We are seeing if we can pull this deadline in to support this. 

For now I'd look at updating the EEPROM specific API's to map to the MSPM33 flash CTL api's

Sincerely,
Erik Vaughn