CCSTUDIO-THEIA: sysconfig: where do I turn off warnings, ULP, info during compile build?

Steve Wenner

Genius 3260 points

Part Number: CCSTUDIO-THEIA

Hello...

new to CCS 20 from CCS 12....Where do find location to turn off warnings, ULP, info during compile build?

Thanks

4 months ago

0 Ki 4 months ago

TI__Guru**** 484841 points

Hi Steve,

Sorry for the delayed response on this. Are you just interested in compiler errors and suppressing all other diagnostic messages? If so, you can try the below:

Set the general build verbosity to "Minimal": https://software-dl.ti.com/ccs/esd/documents/users_guide_ccs/ccs_ide.html#code-composer-studio-settings
For both the compiler and linker in the project properties, go to the Diagnostics options for each and select the option to suppress warnings

Hope this helps

0 Steve Wenner 4 months ago

Genius 3260 points

Hello Ki.

Just getting this (says it came in 8 days ago!!)

Yes for this issue...I was getting mixed up with the other case Ihave open and not being able to jump to functions.

Steve

+1 Ki 4 months ago in reply to Steve Wenner

TI__Guru**** 484841 points

Did the suggestion I made earlier help?

Steve Wenner said:
I was getting mixed up with the other case Ihave open and not being able to jump to functions.

I also replied to that thread and mentioned a workaround. It seemed to help in my case.

Thanks

+1 Steve Wenner 4 months ago in reply to Ki

Genius 3260 points

yes this case can close...thank you!

Code Composer Studio™︎

Code Composer Studio forum

CCSTUDIO-THEIA: sysconfig: where do I turn off warnings, ULP, info during compile build?