• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 52 subscribers
  • Views 1030 views
  • Users 0 members are here
Support feedback
Options
Options

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Can't compile/build after changing Flash Build Configuraiton to RAM Build Configuration - memory sections get overlapped

Greg Oakes
Intellectual 590 points
Other Parts Discussed in Thread: TMS320F28335

No files were directly changed from their as-shipped contents.  The as-shipped Build Configuraiton was Flash.  The Project -> View Build Settings -> General dialog box settings were changed to make Flash the active build configuration, to explicitly designate Delfino Exp Kit, the F28335 processor, and the CCS version.

controlCARD v1.1, TMS320F28335, CCS Version: 5.1.1.00031

  • 0
    Intellectual 590 points

    Resolved.  I think the resolution came about by deliberately/explicitly excluding the F28335_FLASH_FlashingLeds.CMD file from the build, and including F28335_RAM_FlashingLeds.CMD file from the build, in addition to setting RAM rather then FLASH as the active Configuration.  It had appeared earlier, when just changing FLASH to RAM, that the Configuration tool greyed out the FLASH CMD file and activated the RAM CMD file, accomplishing what is necessary im terms of the memory layout.