• Locked Locked
  • Replies 4 replies
  • Subscribers 53 subscribers
  • Views 1498 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Error : linker command file does not match the memory map.

Bong Soo Kim
Prodigy 20 points

Other Parts Discussed in Thread: CC430F5137

Hi,

I use CCSv4 and MSP-FET430UIF. When I fuse my execution file to EM430F5137RF900 board, the following error messages are appeared and can't do any more.

I need your help.

1. Pop-up window error message
    Exception occurred during launch.
    Reason : Fail to load program 'PingPong.out' on target 'TI MSP430 USB1_0/MSP430'.
    Reason : Error found during data verification. Ensure the linker command file matches the memory map. Eefer to the Console View for specific address information.

2. Console error message
    MSP430 : File Loader : Data verification failed at address 0x00000000 Please verify target memory and memory map. Error found during data verification. Ensure the linker command file matches the memory map.

  • TI__Guru*** 130875 points

    Hello,

    can you please provide more details?   What settings do you use in your project?  Do you have the correct target device selected?  In your project and in the ccxml file?

    Can you load example code and other projects onto the device without issue? 

    Any further information would be helpful.

    Best Regards,
    Lisa

  • in reply to Lisa TI
    Prodigy 20 points

    Thank you for your reply, Lisa.

    As I completed compiling and tried to download object file to target board, the upper 2 error messages were happened.

    Developing Environments are

        - Target board : EM430F5137RF900

        - CCS4 : CC430F5137.ccxml , lnk_cc430_4+32.cmd

    I want to send all project file to you. (zip file)

    Could you give me your e-mail address?

    Best regards

    Bongsoo Kim

     

     

     

  • in reply to Bong Soo Kim
    TI__Guru*** 130875 points

    Hi Bongsoo,

    Are you using some special linker command file?  This seems the likely generator of your error.  What if you use the standard one?

    You can send us your project offline by sending a conversation/friend request to me here.  We can try to take a look as time allows.

    Do unmodified examples run fine?

    Best Regards,
    Lisa

  • in reply to Lisa TI
    TI__Guru*** 130875 points

    Hi Bongsoo,

    I just thought I would check whether there is any update to your enquiry.

    Best Regards,

    Lisa