• Locked Locked
  • Replies 1 reply
  • Subscribers 52 subscribers
  • Views 993 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Data verification failed at address 0x8075, while loading program to F28335 PGF control card release 1.0

Ritesh Keshri
Prodigy 10 points
Hi,
I am facing a problem of, data verification failed at address 0x8075, while loading program to  dsp. I am using  F28335 PGF control card release 1.0. (TMDSCNCD28335PGF R1.0 C29). Screen shots are attched.
Ritesh
  • TI__Guru**** 173310 points

    I see in your screenshot that CCS is configured for F28035 XDS100USB. Could you go into the CCS Setup program and make sure to choose F28335 as the device instead of F28035 and then check if the program loads properly?