• Locked Locked
  • Replies 1 reply
  • Subscribers 51 subscribers
  • Views 213 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RE: Cannot connect to the device on the F28069 dev board using CCSV5

sachin gaikwad98887
Prodigy 80 points

Other Parts Discussed in Thread: TMS320F28069

 i have same problem with flash . i use vissim s/w in that we get .out file of our project . now i want to flash this on device tms320f28069 but it gives some problem with flashing. it shows error such as: failed to remove debug state from the target before disconnecting. there may still be breakpoint op-codes embeded error. what to do? thanks,

  • TI__Guru**** 173310 points

    Sachin,

    Please provide more details on your set up. Which specific version of CCS are you using (check under Help->About)?
    Are you trying to load the .out file on to a F28069 controlcard/experimenter kit or a custom board?
    Is it only this one specific file that gives the error? Have you tried flashing other .out files?

    Since you mention generating the code with Vissim, I assume you are starting up a project-less debug session. How is your target configuration file (.ccxml) set up, and what emulator are you using?