Debugging project in CCSv4

Mihail1

Other Parts Discussed in Thread: TMS320F28335

Good afternoon. I develop software for the processor TMS320F28335. Using Code Composer Studio v4.2 and emulator XDS100v1.
Tell me please, is there a possibility to save the file on your PC values ??(states) of a bit or bits while debugging the program,
for example, the values ??of bits of input-output port GPIO or other peripheral module?

over 13 years ago

0 AartiG over 13 years ago

TI__Guru**** 173310 points

Are you looking to save the register values of different registers like GPIO etc. to a file? When you are debugging, you can open the register view, select the registers you are interested in (or select all) and copy and paste their contents to a file. Is this what you are looking for?

0 Mihail1 over 13 years ago in reply to AartiG

Intellectual 320 points

You have not understood correctly. I want to save the file debug information, which include the value of status bits microcontroller peripherals (ADC, DAC, timers, etc.) during a debugging session.

0 AartiG over 13 years ago in reply to Mihail1

TI__Guru**** 173310 points

I'm sorry, but I don't quite understand what you are looking for. Could you please be more specific and provide more details on what you're looking for?

0 Mihail1 over 13 years ago in reply to AartiG

Intellectual 320 points

Can you explain to me the use of a tool such as Port Connect?

After starting the debugger, menu: Tools -> Port Connect

0 AartiG over 13 years ago in reply to Mihail1

TI__Guru**** 173310 points

Mihail1 said:

Can you explain to me the use of a tool such as Port Connect?

After starting the debugger, menu: Tools -> Port Connect

Information on Port Connect is available in the CCS Online Help as well as this wiki page.

0 Mihail1 over 13 years ago in reply to AartiG

Intellectual 320 points

Good afternoon. I did as described in the help. But there was a problem: CCS4 requires GEL_PortConnect function. I did not find this feature in your f28335.gel
Where can I get it?

0 AartiG over 13 years ago in reply to Mihail1

TI__Guru**** 173310 points

Are you trying to use this with a F283xx simulator? According to the wiki page, it is only supported on C6000 device simulators.

0 Mihail1 over 13 years ago in reply to AartiG

Intellectual 320 points

Thank you AartiG. I understand.

Code Composer Studio™︎

Code Composer Studio forum

Debugging project in CCSv4