CIO error in Simulator for TMS320C6745 DSP

gaurav pahuja

Other Parts Discussed in Thread: TMS320C6745

Sir,

Thanks for the help. [ed - see TMS320C6745 DSP ]

Can you sort out one more issue I am coming across i.e. Using CC studio and selecting the simulator connection in the configuration file I am running the simple codes,for my DSP i.e.TMS320C6745 but every time I run a program an error comes.

Invalid CIO command (0) in the CIO buffer at address (0x69e8) was not recognized. Please check the device and program memory maps.

Please let me know the reason for this and what I can do to remove this.

Gaurav

over 14 years ago

RandyP over 14 years ago

TI__Guru* 84110 points

Gaurav,

This post is now in this Code Composer Forum for best results from the right experts.

Please state which version of CCS you are using and which simulator you are using.

Please try a simple "Hello, world" test program to let us know if you are able to get any printf to work correctly.

Regards,
RandyP

Ki over 14 years ago in reply to RandyP

TI__Guru**** 480811 points

Gaurav,

I responded to your other thread that you started. Please post any replies to the other thread.

http://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/187985.aspx

Thanks

Code Composer Studio™︎

Code Composer Studio forum

CIO error in Simulator for TMS320C6745 DSP