• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 53 subscribers
  • Views 581 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS 5.x updates and IAR JLINK

PaulSchoenke
Genius 3290 points

Hello:

2 quick questions with respect to CCS 5.x for Stellaris LM4Fxxxx development:

- is there a way to have CCS 5.x automatically check for updates when the tool is launched?

- is there a way or is it possible to use an IAR JLINK USB debugger with CCS 5.x?

Any feedback or input is welcomed and appreciated!

Thanks very much!

Paul

  • 0
    Guru 117855 points

    Not a CCS user - am happy, paid IAR user - very much doubt that "IAR J-Link" probe may be used with other than IAR.  That said - many/most (perhaps all) J-Links are made by Segger - some are branded IAR - others are not.  Thus your direct contact w/Segger likely best path...

  • 0 in reply to cb1_mobile
    TI__Guru*** 130875 points

    Hi Paul,

    I think you should already be able to find beta drivers.   Official support is planned ... see this post, and yes CCS can auto-check for updates.

    http://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/185175.aspx

    Hope this helps clarify.

    Best Regards,

    Lisa