How to develop the AM3517EVM board

guo kaixin

Other Parts Discussed in Thread: AM3517

Hello,

I am newbie in development of ARM. Now I have an AM3517EVM board ,but I don't know how to start the development . So, can anyone give me some guidance ? I am confused what I should learn firstly, so the more detail , the more better.

Thanks!

over 13 years ago

Ki over 13 years ago

TI__Guru**** 481891 points

Hi,

Since you are getting started for the first time, I would check out the CCSv5 Getting Started Guide:

http://processors.wiki.ti.com/index.php/CCSv5_Getting_Started_Guide

Afterwards, you can move to the CCSv5 more advanced workshop.

http://processors.wiki.ti.com/index.php/CCSv5_Advanced_Workshop

This workshop is for an AM3517 target. Note that the content is a little dated. The workshop assumes there is no native support for AM3517 in CCS. That was true at the time the workshop was created. But support has been added since then.

Good luck!

Code Composer Studio™︎

Code Composer Studio forum

How to develop the AM3517EVM board