J-Link, TMS320DM368, and CCS

Greg Beaty

Other Parts Discussed in Thread: TMS320DM368

Hello,

I have the latest version of CCS and a J-Link EDU debugger. I installed the J-Link support driver for CCS. I created a target configuration and selected the Segger J-Link Emulator from the Connection dropdown. However, I do not see the TMS320DM368 in the Board or Device dropdown. Is this configuration not supported?

Thanks,
Greg Beaty

over 13 years ago

0 Ki over 13 years ago

TI__Guru**** 481281 points

Hi Greg,

According to the CCS J-Link wiki page, looks like ARM9 (which is the ARM processor in the DM368) is not supported yet. I'll try to get an update to see what the latest status is.

Thanks

0 Ki over 13 years ago in reply to Ki

TI__Guru**** 481281 points

Hi Greg,

The latest update is that support for ARM9 is still under instigation. There are still no concrete plans to support this.

Code Composer Studio™︎

Code Composer Studio forum

J-Link, TMS320DM368, and CCS