• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 54 subscribers
  • Views 1718 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320VC33 development unter Code Composer Studio 5

Al Lev
Prodigy 250 points
Other Parts Discussed in Thread: TMS320VC33

Dear Community, I have very old Assembler Project under CCS1  for TMS320VC33.

Can I port this Project under Code Composer Studio 5.  Self Project file *.mak may transformed to Project file Code Composer Studio 5,

but Assembler? How can I bind TMS320VC33 Assembler with Code Composer Studio 5? Same Question C Compiler TMS320VC33 to bind with CCS5.

Where can I find matched Assembler and C Compiler? Please in Details if you can.

Regards

Alex

  • 0
    TI__Guru**** 472311 points

    Hi Alex,

    Unfortunately the VC33 has not been supported by a CCS release in a very very long time. In fact in was never (officially) supported by CCS. The last official support for it was in CC 4.x (without the 'S') about 15 years ago.

    I would stick with using your existing environment for continued VC33 support.

    Thanks

    ki

  • 0 in reply to Ki
    Prodigy 250 points

    Hi Ki, thanks a lot for you answer and support.

    Probably do you know some more Information about Development Tools for VC33 or some Links - ohter as TI? I found DSK (under tms320c33 search) on TI Page, - is CC 4.x better? I'll use yours Information search  on Monday about CC4.X. In my wish I would prefere go to another DSP - neu and has more support, but customer ..... is not ready for this. Then I must go ahead with VC33.

    Good weekend and Thanks

    Alex

  • 0 in reply to Al Lev
    TI__Guru**** 472311 points

    Alex,

    You mentioned that you have a project from CCSv1. Do you have CCSv1 with VC33 support or did you inherit this project and are looking for the tools to build it?

    Thanks

    ki

  • 0 in reply to Ki
    Prodigy 250 points

    Dear Ki,

    you are right. Our Partner thought that is one CCSV.1 Project. But you ave right. Is one CC3.x CC4.x. I'm out of the office for par days, and has no time to analyze the Project more deeper. CC3.x  CC4.x is right tools, but its very old, and I thought that probably exists some new tools, probably not from TI. But with you Help and tip of CC3.x CC4.x i got very good help.

    Thanks a lot

    Alex