Code Composer Studio™︎

Code Composer Studio forum

State
Locked Locked
Replies 3 replies
Subscribers 54 subscribers
Views 1515 views
Users 0 members are here

Support feedback

Options

Options

Related

Error connecting to target, dll file not found.

Amit Nain

Prodigy 115 points

Hi All,

I get the error as when I try to debug:

Error connecting to the target: (Error -600 @ 0x0) A required dynamic library could not be located. The library isn't on the search path. (Emulation package 5.0.747.0)

I am using CCSv5.2.

When I using Texas Instruments Simulator for the program it doesn't given any error and works fine. But When I try to use Texas Instruments XDS100v1 USB its giving me this dynamic linking error.

Please help.

over 13 years ago

0 desouza over 13 years ago

TI__Guru**** 171439 points

Hi,

Can you check if the similar reported issue at the thread below helps you?

http://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/113152.aspx

Hope this helps,

Rafael

0 Amit Nain over 13 years ago in reply to desouza

Prodigy 115 points

Hi Rafael,

It seems like a similar issue, but I haven't installed in C:\ProgramFiles\TexasInstruments but I used C:\ti\ to install BIOS.

I have installed CCSv5 on other machine as well and There i get the following error:

This program can't start because FTD2XX.dll is missing from your computer. Try reinstalling the program to fix this problem.

Should I reinstall the program or there is other solution ?

Thanks

Amit

0 Amit Nain over 13 years ago in reply to Amit Nain

Prodigy 115 points

Its urgent. Please help.