• Locked Locked
  • Replies 3 replies
  • Subscribers 52 subscribers
  • Views 748 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

error when trying to view GEL files

Robert Wolfe
Mastermind 7860 points

Hello,

Using CCS V5.1, I am trying to view GEL files, from the menu shown below.

But when I click on GEL Files, I get the following popup:

Please advise,

Robert

  • TI__Guru**** 450031 points

    Hi Robert, 

    Can you show the details (Press the 'Details >>' button)?

    Also if you select the 'Memory Map' option, does that work?

    Thanks

    ki 

  • in reply to Ki
    Mastermind 7860 points

    Ki,

    Attached are the details.  I see the CCS developers have helped us much, with all that extra information :)

    Also, here is the Memory Map selection.  No pop-up error message, but also no other information, other than to say look at GEL Files (which I can't).

    Regards,

    Robert

  • in reply to Robert Wolfe
    TI__Guru**** 450031 points

    Yup, not very useful. 

    Robert56682 said:
    No pop-up error message, but also no other information, other than to say look at GEL Files (which I ca

    Are sure you are in a valid debug session? As long as you are in a debug session and have a proper debug context, you should see valid content for the memory map, GEL and generic debugger options