about CCS 4.0 default inc and lib path

Hydrogen Chen

I'm a new user of CCS 4.0 with the dsp C6472. In ccs 4.0 how can I add lib and inc files into my every project(such as the CSL lib)?It is very inconvenient to add CLS inc files and lib files into my every new created project. Is there any solutions so that I can set the csl inc and lib files as default inc and lib path into my new every CCS 4.0 project? THX

over 13 years ago

0 Ki over 13 years ago

TI__Guru**** 482311 points

Hello,

There are two options off the top of my head:

1 - use a command file. A command file is a text file where you can specify options and pass it to the compiler/linker. You can have all your shared options in those files and then simply point the build tools to them for a new project. Easier than adding all the options manually

2 - You can create a new project template with the build options you want. This will require you to update your CCS version to at least 4.2 (which is recommended since your CCS version is very old).

http://processors.wiki.ti.com/index.php/Project_Templates_in_CCS

Hope this helps