• Locked Locked
  • Replies 2 replies
  • Subscribers 53 subscribers
  • Views 1811 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

error #10008-D cannot find file "msp430g2231_mod.cmd"

Daniel Chavez1
Prodigy 10 points
Other Parts Discussed in Thread: MSP430G2231

Good Morning,

I am using CCS V5.2.1.00018

I am getting the following error:

error #10008-D cannot find file "msp430g2231_mod.cmd"

upon building ccs project. I am not sure what the problem is.

P.S. The code was working a few weeks ago. 

thanks for reading this.

~DC

  • TI__Guru*** 130875 points

    Hi Daniel,

    if the code was working, then my first question would be what might have changed?  Did your run any updates?  Made any modifications to your system/environment? Made any changes to the project or workspace settings?

    Have you tried importing the project into a fresh workspace?

    One reson for this error would be include path/variable problems.  Unfortuantely, however, a bit further information might be needed in order to assist you.

    Best Regards,
    Lisa

  • in reply to Lisa TI
    TI__Guru*** 130875 points

    Hi Daniel,

    just thought I would check if there was any further updates or information regarding your enquiry.

    Best Regards,
    Lisa