• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 52 subscribers
  • Views 1134 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Download CCS code to TMS320C6748

XX PP
Intellectual 270 points

Other Parts Discussed in Thread: TMS320C6748

Hi,

 

I have compiled a CCS code to generate sine-wave.

However, I don't know how to download this CCS code to the DSP development board TMS320C6748, and then let C6748 to generate sine-wave itself.

In addition, the CCS said that 'No source available for "abort() at 0x80005f60" ', when I debug the C code.

 

Thanks,

PP

  • 0
    TI__Guru*** 130875 points

    Hi,

    I think the best thing would be to have a look at some tutorials and some of our good wiki material/topics.

    http://processors.wiki.ti.com/index.php/Main_Page

    From this page you have links to training on both CCS and devices etc.

    If you have your board connected, have no compile errors, entering a debug session will automatically load the code.   I am not exactly sure what you mean by not being able or sure how  to download code.   The message about no source is not likely a big issue and could simply be from your settings or if you do not have a main etc.   You should see an option to tell ccs where the source code is and then this will be resolved.

    Best Regards,
    Lisa