CCS5 -- XDS560 simulate 2 sets C6713 at same time

Hi Grace,

Thank you for taking the time to record and post a video. It was very helpful.

It looks like CCS crashed on terminating the debugger. This looks like a bug to me. Could you tell me which exact version of CCS you are using (provide the full version number like 5.2.1.00018)? And since CCS crashed, there may be a Debug Server dump file. Could you attach that file here?

http://processors.wiki.ti.com/index.php/Troubleshooting_CCSv5#CCS_Diagnostic_Logs

Thanks

ki

Hi Ki,

CCS Ver 5.2.1.00018

PC OS : Win7

1781.EclipseConfig.log

6644.EclipseWS.log

Thank you for the attached logs. Was there also a file with a *.dmp extension? That would also be very useful

Thank you

ki

Hi Ki,

Attached file is you need

Hi Ki,

Sorry, lose to attach file

4442.CCS5 file.rar

Hi Grace,

Thank you for attaching the dump file. The engineers have analyzed it and have narrowed down the potential cause to the ctools components. Could you try disabling ctools and see if that helps? If it does, then we can confirm their suspicions.

To disable it, simply rename or remove the 'ctools.dll' file in:

<CCSv5 INSTALL DIR>\ccsv5\ccs_base\emulation\analysis\bin

Thanks

ki

Hi Ki,

I rename the "ctools.dll" file , it can work normal.

CCS5 I also use in C2000/C5000. If the ctool rename ,Can these body work normal ???

Thank a lot for your help. ^_^

Dear KI,

Thanks a lot for reply & I'm waiting your new CCS version.

Best Regards.