• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 54 subscribers
  • Views 1963 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Windows 7: Registry keys for CCS3.3

Erich Riedisser
Prodigy 10 points

Hello,

 

In some of our projects we are still using CCS3.3.

In the meantime more and more of our computers are working with Windows 7. This has led to some problems, e.g. it’s necessary to start CCS3.3 as an administrator. Because of our company’s IT security policy this is just a temporary workaround. But it would be possible to give the necessary rights to the dedicated registry keys.

Which of them are needed by CCS3.3 and where can they be found in the registry?

 

Thank you and best regards

E. R.

  • 0
    TI__Guru**** 464171 points

    Hello E.R.,

    As you know, we do not support or recommend running CCS 3.x (and earlier) on Windows 7. People are strongly encouraged to move to CCSv4 and greater. Of course this is easier said than done and many still use CCSv3.x on Windows 7.

    Erich Riedisser said:
    Which of them are needed by CCS3.3 and where can they be found in the registry?

    The majority of the registry entries used by CCSv3.3 are in:

    Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Texas Instruments

    There is also a wiki on some suggestions on running CCS on Windows 7:

    http://processors.wiki.ti.com/index.php/Using_CCS_with_Windows_Vista_and_7

    Good luck

    ki

  • 0 in reply to Ki
    Prodigy 20 points

    "I want to generate a Code for my TI C2000 F28335 processor. Code Composer Studio is able to connect with the processor, but every time I try to build a model for it in Matlab I get following failures:

    "The call to idelink_ert_make_rtw_hook, during the entry hook generated the following error: Could not connect to the board specified in Target Preferences block.

    The build process will terminate as a result.

    Could not obtain board configuration from Code Composer Studio™. Make sure that Code Composer Studio is installed and properly registered.

    Error map is empty."

    I use MatlabR2011b and I have the embedded Coder." i have followed  your  suggestions stated above but it is not connected.

    now how can i solve this problem? Thank you.

  • 0 in reply to papan dey
    TI__Guru**** 464171 points

    papan dey said:

    "I want to generate a Code for my TI C2000 F28335 processor. Code Composer Studio is able to connect with the processor, but every time I try to build a model for it in Matlab I get following failures:

    "The call to idelink_ert_make_rtw_hook, during the entry hook generated the following error: Could not connect to the board specified in Target Preferences block.

    The build process will terminate as a result.

    Could not obtain board configuration from Code Composer Studio™. Make sure that Code Composer Studio is installed and properly registered.

    Error map is empty."

    I use MatlabR2011b and I have the embedded Coder." i have followed  your  suggestions stated above but it is not connected.

    now how can i solve this problem? Thank you.

    This question is a duplicate of a new thread here:

    http://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/236378.aspx

    Your post has been responded to in the above thread. In the future, please start a new thread for a new question.

    Thanks

    ki