v5.3 build fails

Kurt Jensen

Updated ccs5. Now my project fails to build because of errors in the TCF file. Build works fine on another computer. Console output attached.

Actually, I did not update because that does not work - http://e2e.ti.com/support/development_tools/code_composer_studio/f/81/p/233236/819205.aspx

Completely removed every TI software then reinstalled every TI software. Now ccs5 runs but will not build.

over 13 years ago

0 Kurt Jensen over 13 years ago

Genius 5040 points

Having been forced to completely remove and reinstall ccs5 on another computer - http://e2e.ti.com/support/development_tools/code_composer_studio/f/81/p/240813/842668.aspx#842668

I am now getting the same error on the other computer. Seems that ccs5.3 shuts down development no matter where you hide...

Any ideas or suggestions would be greatly appreciated as we are now prevented from doing any work...

0 Kurt Jensen over 13 years ago in reply to Kurt Jensen

Genius 5040 points

FYI - ccs5.3 uninstall locks up "Cleaning up Install Registry"... Killed the process, deleted all of the folders.

Downloaded and installed 5.2.1 (appears we are not the only ones, the download is very slow...) Project compiles again and debugger appears to be working

Just because I need to say this to someone... This is one too many CCS upgrade oops for us. We will only upgrade CCS in the future under extreme duress. We will upgrade CCS in the future only if our project cannot work without it.

Code Composer Studio™︎

Code Composer Studio forum

v5.3 build fails