Blackhawk 560 drivers in CCS installation

David Newman3

Other Parts Discussed in Thread: TMS320C6678

I purchased the TMDXEV6678LE kit which contains an EVM with the TMS320C6678 on it. The kit also contains a built-in Blackhawk 560v2 jtag.

I installed all the files on the CD, but the drivers for the Blackhawk 560 are not present on the CD. The Blackhawk says that these files must come from TI with my CCS install. Can someone help me find the correct dirivers I need?

over 13 years ago

0 Ki over 13 years ago

TI__Guru**** 480781 points

Hi David,

The drivers for the 560v2 mezz card should be included with later version of CCSv5. What exact version are you using?

Thanks

0 David Newman3 over 13 years ago in reply to Ki

Intellectual 920 points

I have CCS version 5.3. I was not able to use the CCS that came with the DVD in the EVM, but had to download a newer copy from the TI website. Once I downloaded the new version, I was ok.

0 Ki over 13 years ago in reply to David Newman3

TI__Guru**** 480781 points

Thanks for the update

David Newman3 said:
I was not able to use the CCS that came with the DVD in the EVM

This is not very user friendly. What version of CCS was on that DVD?

Thanks

Code Composer Studio™︎

Code Composer Studio forum

Blackhawk 560 drivers in CCS installation