Team,
I am trying the steps described in the below training on the Linux version of CCS 5.3 :
http://processors.wiki.ti.com/index.php/Sitara_Linux_Training:_uboot_linux_debug_with_ccsv5#Lab_Steps_10
I am at the step where I have loaded the vmlinux (build with symbols) and add a HW BP in the src code.
The difference bewteen this tutorial (left on the enclosed picture) and my config (right) is that the symbols/fct name does not show neither in C and D.
In my debug window it still shows "no symbols are defined for 0x8.....").
Is the tutorial missing some steps or am I missing something?
Thanks in advance,
A.
