XDS200 USB emulator Load Error

manjunath tapasi

Intellectual 450 points

Other Parts Discussed in Thread: TMS320F28335

Hi,

I am using CCS5.2 (SYS/BIOS) for my development project.

and i am using XDS200 USB Emulator.I have updated the JTAG emulator driver.But its giving load error.

Please share your comments.

Thanks,

Manju

over 13 years ago

0 Tom Kopriva over 13 years ago

TI__Mastermind 20480 points

Hi Manju,

what device and which version CCS are you using?

5.2.#.#####? Are you able to connect your emulator to the target?

0 manjunath tapasi over 13 years ago in reply to Tom Kopriva

Intellectual 450 points

Hi Tom,

I am using TMS320F28335 DSC.

CCS version is : CCS 5.2.0.00069

Thanks,

Manju

0 David Friedland over 13 years ago in reply to manjunath tapasi

TI__Mastermind 18320 points

Manju,

Since your issue seems to be getting the emulator working in CCS rather than anything specific to BIOS, I have moved this thread over to the CCS forum in hopes that it will get a faster resolution there.

Dave

0 Ki over 13 years ago

TI__Guru**** 480311 points

Hi Manju.

Is there not any more details? Was there any other error messages in the output window?

Thanks

0 manjunath tapasi over 13 years ago in reply to Ki

Intellectual 450 points

Hi Ki,

I am getting this error in console

0 Ki over 13 years ago in reply to manjunath tapasi

TI__Guru**** 480311 points

Thanks. It failed trying to erase the flash before programming it.

One thing I ask you try, if you don't mind, is to update your version of CCS to v5.3.0. I'm hoping some of the flash programmer changes made in the most recent CCS version will help resolve this issue.

Code Composer Studio™︎

Code Composer Studio forum

XDS200 USB emulator Load Error