• Locked Locked
  • Replies 2 replies
  • Subscribers 54 subscribers
  • Views 431 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Code Composer flash tool works while SDFlash through serial doesn't.

Francesco Di Vita
Prodigy 20 points

Other Parts Discussed in Thread: TMS320F28335

Hi,

while using SDFlash utility on our Texas TMS320F28335 based proprietary board we have detected a bug.

After erasing, programming and verifying ends without errors we realize, using Code Composer memory dump, that our SW isn't completely written on DSC flash memory.

If we use the internal Code Composer flash tool through JTag connection  we obtain what we need. Both C and D sectors are written as expected on flash memory and sw boots properly.

Please note that we need to use SDFlash tool through serial port.

Our SDFlash version is 1.63, our Code Composer version is 3.3.82.13 (code generation tools 5.1.0) ]

Best  regards.

Francesco  Di Vita