• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 53 subscribers
  • Views 361 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

how to learn using DSPLINK to program ARM + DSP in Linux

azsde ploekd
Prodigy 10 points

Hi everyone,

I would like to know how to program DSP + ARM using DSPLINK in Linux.
I've already installed DSPLINK and configure it.
And i wish you could help me with some informations or datasheets in order to get started with DSPLINK.

Thank you;

  • 0
    TI__Guru**** 173310 points

    This is not the best forum for your question but I can refer you to the wiki page on DSPLink which would be a great place to get started for resources. It has links to several other technical wiki pages. If you have a speciifc question after reviewing those resources, I would suggest posting it to the forum for the specific device you are working with, as they would be able to assist better or at least point you in the right direction.