xds100V2 + DM814x problem

Le George

Intellectual 425 points

TI Gurus,

I've encountered these issues:

1. CCS & XDS Time out

Is this problem related to this link?

http://e2e.ti.com/support/development_tools/code_composer_studio/f/81/p/218623/771906.aspx#771906

2. Memory Browser not visible while checking out video capture mode

I've tried different modes of video inputs: Component, VGA, Composite video, but the memory can only be accessible in suspended mode.

Mistral is recommending the Blackhawk Emulator.

Please help!

Devt platform: CCS 5.3, Ubuntu 11.10, EZSDK 5.05.02.00

over 13 years ago

0 Ki over 13 years ago

TI__Guru**** 480691 points

Le George said:

Is this problem related to this link?

http://e2e.ti.com/support/development_tools/code_composer_studio/f/81/p/218623/771906.aspx#771906

Are you also experiencing the issue when waking your PC from sleep?

Le George said:
I've tried different modes of video inputs: Component, VGA, Composite video, but the memory can only be accessible in suspended mode.

Unless you device supports CCS real-time mode (which ARM does not), you normally cannot make non-intrusive memory accesses to the target (you have to suspend the target). However, some ARM devices support non-intrusive memory accesses via the DAP:

http://processors.wiki.ti.com/index.php/Debug_Access_Port_%28DAP%29

Thanks

0 Le George over 13 years ago in reply to Ki

Intellectual 425 points

Ki,

1. Are you also experiencing the issue when waking your PC from sleep?

My PC is always ON.This error has occasionally appeared after 5+ minutes idle. It's a bit painful to reload the application and resume the debugging process.

2. DAP

I can live without DAP. Examining the memory in suspended mode is fine. However, certain memory locations not being updated may be related to the DM814x board.

Thank you,