Other Parts Discussed in Thread: UNIFLASH
Hi,
Now I can't to download program into TMS570LS31HDK (so as to the demo_software ), Can you give me the reason? and tell me how to download the uniflash and Code Composer Studio 5.3 ? Thank you
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Other Parts Discussed in Thread: UNIFLASH
Hi,
Now I can't to download program into TMS570LS31HDK (so as to the demo_software ), Can you give me the reason? and tell me how to download the uniflash and Code Composer Studio 5.3 ? Thank you
Hi Bill,
can you please explain in detail what exact issue(s) you are experiencing?
CCSv5.3 and Uniflash are available from the following wikis
http://processors.wiki.ti.com/index.php/Download_CCS
http://processors.wiki.ti.com/index.php?title=Category:CCS_UniFlash
Best Regards,
Lisa
Hi Bill,
I may have to send your post to the Hercules team but could you please clarify
- what target do you use and how have you been connecting
- what steps have you been taking
- is my understanding correct your issue is only this flash programming error
Best Regards,
Lisa
Dear Lisa,
Yes,I have connect the HDK to the USB and to PC,so as to the electric source. I have tried the Demosoftware,nowFlash and Code Composer Studio 5.1,Can you understand my meaning? Thank you very much and looking forward to your reply.
Best Regards,
Bill
Hi Bill,
my first comment would be I would recommend doing a fresh installation of v5.3 (do not update as there are known problems) into a clean directory. I saw the other thread where you looked for a like to 5.3 so this is a good idea.
I would try again after doing that. If you still see issues, please post in detail the steps you take and the issue you experience.
Best Regards,
Lisa