• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 53 subscribers
  • Views 455 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430 and ccs learning for beginner

Chanon Khunakridatikarn
Prodigy 80 points


Hi

I have the mcu and a learning book. In the book,There are many source code for commanding the mcu. However,I don't quite understand the code even there are some explanation. Anyone has the beginner book for studying the msp430 and the code,please tell me.( For beginner please!)

Thank you

  • 0
    TI__Guru*** 130875 points

    Hi Chanon,

    I hope the following helps

    - I would post your question on the msp430 forum as they will know much more about their own books/resources etc.

    Some useful getting started links

    MSP 430 main wiki landing page

    http://processors.wiki.ti.com/index.php/MSP430

    CCS training page with msp430 workshops and more

    http://processors.wiki.ti.com/index.php/Category:CCS_Training

    CCS main wiki page

    http://processors.wiki.ti.com/index.php/Category:Code_Composer_Studio_v5

    General wiki

    http://processors.wiki.ti.com/index.php/Main_Page

    Hope this helps.

    Best Regards,

    Lisa

  • 0 in reply to Lisa TI
    Prodigy 80 points

    Hi Lisa

    Nice to see your reply again :) I will try on your link. It's for ccs v5 and I think there's no problem? since I use ccs v4.

    Have a nice day

    Chanon

  • 0 in reply to Chanon Khunakridatikarn
    TI__Guru*** 130875 points

    Hi Chanon,

    it should be quite similar although you may find a few differences if using v4.  I would definitely recommend using the latest released version which is v5.3.

    Best Regards,
    Lisa