Programming for CC2538?

wwhuang

Other Parts Discussed in Thread: CC2538, UNIFLASH

CCS lets me create a project for the CC2538, but doesn't appear to recognize any register names, and does not include a cc2538.h type file like msp430 projects do. Any suggestions on what to do?

I know that you're supposed to be able to program the CC2538 EMs + SmartRF06 boards using SmartRF studios, but SmartRf studios tells me that the cc2538 is unrecognized, and does not include it in it's list of supported chips.

over 12 years ago

0 Greenja over 12 years ago

Guru 22270 points

Hello William,

There was a post regarding programming of the CC2538 with CCS using Uniflash 2.1. It may be helpful.

http://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/255389.aspx

Thanks,

0 Lisa TI over 12 years ago in reply to Greenja

TI__Guru*** 130875 points

Hi william,

have you tried a generic m3 device? Otherwise I would recommend posting to the low power rf/zigbee forum.

Best Regards,

Lisa

0 wwhuang over 12 years ago in reply to Lisa TI

Prodigy 145 points

I have tried a generic m3 device. I believe the problem is that I need the cc2538 foundation firmware http://www.ti.com/tool/cc2538-sw, which has not been made available yet. I'm guessing I can program these directly in assembly, but I'm hoping to avoid that. Thanks for the suggestion to post in the zigbee forum though, I'll be sure to try that.

Greenja, that link is helpful for anyone working with the cc2538, but that's for after I can actually compile code for it.

0 Lisa TI over 12 years ago in reply to wwhuang

TI__Guru*** 130875 points

Hi,

yes, please do post to the zigbee forum. I think they will be better able to help you.

Best Regards,
Lisa

Code Composer Studio™︎

Code Composer Studio forum

Programming for CC2538?