• State Resolved
  • Locked Locked
  • Replies 6 replies
  • Subscribers 53 subscribers
  • Views 1050 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

How to fix this stuff

Patrick NYAME
Prodigy 40 points

Hello! I am working witk DSK6713 under windows 8 with CCSV5.2 When i try to launch debugger i get this error: "Unable to load C:\ti\ccsv5\ccs_base\emulation\drivers\sdgo6713dsk.dvr: The specified procedure could not be found." And my board  was not recognized in device manager because the correct driver cannot be installed. Can somehome gives me idea, how to fix this problem? 

  • 0
    TI__Guru* 84110 points

    Patrick,

    I doubt CCSv5 is supported on Windows 8, yet. Have you found any documentation from TI that says it is supporting on Windows 8?

    If there are compatibility modes, you might be able to get it to work in one of those modes.

    We will ask a Moderator to move this thread to the Code Composer Forum for a more accurate answer since this question is related to the software tools and not to the device.

    Regards,
    RandyP

  • 0
    TI__Guru*** 130875 points

    Hi Patrick,

    Randy is correct, there is not yet official win 8 support, however we have seen customers using win 8 successfully.

    This is of course at times dependant on third parties.  Have you double checked

    - it seems you use a spectrum digital emulator.  Have you double checked spectrum digitial support for win 8, have you downloaded any updated/win 8 drivers they offer (if any)?

    - I would also double check permissions/antivirus interference on the driver

    Please keep us informed.

    Best Regards,
    Lisa

  • 0 in reply to Lisa TI
    Prodigy 40 points

    Hi Lisa

    Thanks for all your  suggestion. I downloaded CCS V5.3 and installed it. It's working on win 8 with my DSK. 

    Thank you.

    Best regards,

    Patrick

  • 0 in reply to Patrick NYAME
    TI__Guru*** 130875 points

    Hi Patrick,

    so are you past the issue?  In either case please give the suggestions a try and keep us informed.

    Best Regards,
    Lisa

  • 0 in reply to Lisa TI
    Prodigy 40 points

    Hi Lisa!

    I think that it run simply under win 8 with ccsv5 as run it with others OS. No special way, just install and run it

    Best Regards,

    Patrick

  • 0 in reply to Patrick NYAME
    TI__Guru*** 130875 points

    Hi Patrick,

    if you are still having issues can you please double check spectrum digital support.  Also please provide a bit further information on how (if installed yourself) you installed the drivers, have you made sure no antivirus or permission block is at fault here, and the context.  This will help get us a clearer picture. 

    Best Regards,
    Lisa