• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 53 subscribers
  • Views 536 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Real-time mode debug

Masky
Intellectual 900 points

Hello,

I'm using CCS v3.3 with a DSP model TMS320F28x. Until recently I was debugging in Real-time mode, but now I can't, suddenly CCS doesn't allow this option.

Thank you for your help.

  • 0
    TI__Guru**** 451311 points

    Hello,

    You have given us very little details here.

    Masky said:
    Until recently I was debugging in Real-time mode, but now I can't, suddenly CCS doesn't allow this option.

    Please explain in detail. Provide screenshots and error messages verbatim.

    Thanks

    ki

  • 0 in reply to Ki
    Intellectual 900 points

    Hello,

    I haven't any error. Only check when CCS asks if I want to allow realtime mode debug.

  • 0 in reply to Masky
    TI__Guru**** 451311 points

    This is not a bad thing. CCS is asking if it can configure the debugger/target for real-time mode. I have seen this also. I select Si/Yes

    ki