• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 54 subscribers
  • Views 233 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS HOW To?

Ravikiran HV
Mastermind 8715 points

I am using CCS V 3.5 on DM814x board, which runs ipnc rdk on it.

I want to debug the JPEG codec. How to do that?

Thanks in advance

  • 0
    TI__Guru**** 481931 points

    Hello,

    Your question is very general. It sounds like you are just getting started with CCS. I would start with the material in the CCS training page and look through the material there. Some of the getting started material and workshops would be a good place to start.

    Thanks

    ki