Problem with code composer studio..

Arslan Abbasi

Other Parts Discussed in Thread: CCSTUDIO

I've installed code composer studio v3.3 on Windows 7 64-bit but its not starting after target device select, which in my case is DM6437 DAVINCI board and the error msg is,

Your Code Composer Studio does not support the connected target.

Device driver name: "C:\CCStudio_v3.3\drivers\tisimC6xxx.dvr"

Kindly help!

over 12 years ago

0 Igor Gorbachev over 12 years ago

Guru 20525 points

Hi!

Perhaps this link will be useful http://www.sevenforums.com/tutorials/316-compatibility-mode.html

Regards,

Igor

0 Ki over 12 years ago

TI__Guru**** 479881 points

Arslan,

What is the full version number of your CCSv3.3 install? Are you using a CCSv3.3 kit version (a CCSv3.3 version that came with your board)?

Thanks

0 Arslan Abbasi over 12 years ago in reply to Ki

Intellectual 265 points

Yeah, Ki-Soo Lee i'm using the exact same version of CCS that came with the DM6437 board.

0 Ki over 12 years ago in reply to Arslan Abbasi

TI__Guru**** 479881 points

The CCS versions that come with a board is a limited version that is locked to the on-board emulation of that board. You can not use any other configuration. The error message is referencing a simulator driver. You would not have any simulator support with that CCS install.

Thanks

Code Composer Studio™︎

Code Composer Studio forum

Problem with code composer studio..