CCS list processes information on Linux when debug linux kernel

feng dong1

Dear experts,

On CCS 4 there is Linux Aware Debug and have debug configuration can list processes run on Linux. But on CCS 5 I can not make it happen. Does anyone can tell me when we can support list processes on Linux? Thank you very much.

Regards

over 12 years ago

0 Gautam Iyer over 12 years ago

Guru 192875 points

Hi,

I would like you to go through the following link for info:

http://processors.wiki.ti.com/index.php/Linux_Debug_in_CCSv5

Regards,

Gautam

0 feng dong1 over 12 years ago in reply to Gautam Iyer

Prodigy 20 points

Hi Gautam,

I already follow the link before and successful debug kernel by CCS. My problem is I would like watch all threads status and stack like Trace32 doing. On CCS you only can watch current thread stack, but on Trace32 you can watch all thread in kernel. Do you know how to do it? As I know CCS5 do not have this function, I would like know when CCS can implement this function.

Regards,

Feng

0 AndyW over 12 years ago in reply to feng dong1

TI__Genius 16510 points

Feng,

When we moved from a customized version of Eclipse in CCSv4 to using an off-the-shelf version of Eclipse in CCSv5.x, keeping this feature wasn't feasible for us us as it relied on changes in the Eclipse platform and CDT.

We are aware there are users of this feature and it is on the list of enhancements for us to implement. I cannot give you a specific time-frame however.

Code Composer Studio™︎

Code Composer Studio forum

CCS list processes information on Linux when debug linux kernel