Can not launch XDS560v2-USB with CCS v3.3

ChangSeok Ha

Dear sir,

I just bought blackhawk XDS560V2(BH-USB-560V2).

I try to launch it with CCS v3.3 (OS window7).

I just know that XDS560V2 can support from CCS V4.2,

I try to find driver for 3.3, but I found it for XDS560. not XDS560v2.(http://www.blackhawk-dsp.com/support/Drivers33.aspx)

Can I use this driver for my XDS560v2 JTAG(BH-USB-560V2)?

CCS version : 3.3.83.20

JTAG : XDS560v2(Blackhawk BH-USB-560v2

OS : Window 7 64bit.

Could you let me know how to use XDS560V2 with CCS v 3.3?

Thanks.

over 12 years ago

0 Ki over 12 years ago

TI__Guru**** 483691 points

Hi Chang Seok,

XDS560v2 is not supported on CCSv3. You need at least CCSv4. Sorry

0 ChangSeok Ha over 12 years ago in reply to Ki

Prodigy 220 points

Hi Ki,

Thanks for your feedback.

If so, which JTAG emulator is the best one to support for CCSv3.3?

I'm using DM648 & C6672. Can you recommend JTAG? XDS100v2 or XDS200?

Thanks.

best regards,

0 ChangSeok Ha over 12 years ago in reply to Ki

Prodigy 220 points

Hi Ki,

Thanks for your feedback. I understand.

If so, can you recommend JTAG for CCS v3.3? XDS100v2 or XDS200 or other?

I'm using DM648 and C6672. So I need high performance JTAG for development.

Best regards,

0 Ki over 12 years ago in reply to ChangSeok Ha

TI__Guru**** 483691 points

Newer emulators like XDS100v2 and XDS200 are not supported on CCSv3.3 either. XDS100v1 is supported on CCSv3.3 but not for your devices and XDS100 is a low performing emulator anyway.

XDS560 (not XDS560v2) is the best performing emulator you can get with CCSV3.3.

Code Composer Studio™︎

Code Composer Studio forum

Can not launch XDS560v2-USB with CCS v3.3