TI-RTOS exmaple "uartecho"

Michi Yama

Guru 10030 points

Other Parts Discussed in Thread: EK-TM4C123GXL

Hi,

I have one question regarding TI-RTOS sample program.

I am using EK-TM4C123GXL launchPad.

I am trying to run "uartecho" sample program. But I had error message in console window of CCS.

The message is the below.

Starting the UART Echo example
System provider is set to SysMin. Halt the target and use ROV to view output.

I would like to echo the character on Hyperterminal. What should I do for that?

Please let me know.

I appreciate your quick reply.

Best regards,

Michi

over 12 years ago

0 Ki over 12 years ago

TI__Guru**** 480451 points

Hi Michi,

Take a look at the RTOS Analyzer training module. It covers using the ROV with a Tiva example on a Tiva LaunchPad. It also covers how to use a terminal program to communicate with the target over uart;

http://processors.wiki.ti.com/index.php/CCS_Modules_Library#RTOS_Analyzer_.28RTA.29

thanks

0 Michi Yama over 12 years ago in reply to Ki

Guru 10030 points

Dear Ki-san,

Thank you for your cooperation.

My PC can't open its presentation. Presentation format is "xml" file. My PC is installed office 2007. But its xml file

is opened. When I opened it by PPT, some error happens. And my PC can't recover it.

Could you open its file?

Best regards,

Michi

0 Michi Yama over 12 years ago in reply to Michi Yama

Guru 10030 points

Dear Ki-san,

I could open its file by changing ".zip" to ".pptx".

Now I can see the presentation.

Thank you for your support.

Best regards,

Michi

Code Composer Studio™︎

Code Composer Studio forum

TI-RTOS exmaple "uartecho"