Problems with debuging MSP-TS430QFN40

Milan Vrbicek

Other Parts Discussed in Thread: MSP430FR5739

I tried to debug MSP430FR5739 in the prototype target board MSP-TS430QFN40 connected to MSP-FET430UIF debuger inside the CCS v.5. The error is

Error initializing emulator:
The voltage 1693 value is not correct/allowed for the USB FET

What I am doing wrong?

Milan

over 12 years ago

Gautam Iyer over 12 years ago

Guru 192875 points

Hi,

Did you check with the voltage levels on the board? Secondly, check with the configuration settings of the MSP-FET430UIF debugger.

Regards,

Gautam

Lisa TI over 12 years ago

TI__Guru*** 130875 points

Hi Milan,

did you set a voltage/change settings in your target configuration? Is this your own prototype? If so, how are you powering it and have you made sure the JTAG connections are as required?

What exact ccs version are you using?

Best REgards,

Lisa

Lisa TI over 12 years ago in reply to Lisa TI

TI__Guru*** 130875 points

Hi Milan,

just thought I would check whether there are any updates with your enquiry.

Best Regards,
Lisa

Code Composer Studio™︎

Code Composer Studio forum

Problems with debuging MSP-TS430QFN40