• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 54 subscribers
  • Views 2509 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Problem in CSS "Build error: cannot run cl2000"

Prashant15714
Prodigy 75 points

Other Parts Discussed in Thread: CCSTUDIO

I am using CCS 3.3 vesion since two year for development of software for c2000 series processor.

Today , when I was building the project following error came in command window

" Build error: cannot run cl2000 "

Kindly help.

 

Prashant jain

M/S B.H.E.L.

  • 0
    TI__Guru**** 173310 points

    I would expect this type of error to appear if CCS is unable to locate cl2000 (maybe due to component manager not being pointed correctly to where code generation tools are installed), or, if component manager is correctly pointed, maybe the build interface dll needs to be re-registered.

    First go into CCS Component Manager (Help->About->Component Manager) and check that the version of Build Tools selected for 28xx is pointing to a path that contains cl2000.

    If this is ok, then try manually re-registering the bti2000.dll by doing the following:

    1. Close CCS
    2. Open a command window
    3. cd to C:\CCStudio_v3.3\c2000\cgtools\bin (or whichever path is pointed to by the version selected in component manager)
    4. type “regsvr32 bti2000.dll” (this should give a success message)
    5. Bring CCS back up and try to re-build the project.

  • 0 in reply to AartiG
    Prodigy 75 points

    Dear Aarti ,

    Thanks for the reply ,

    I have tried the same.

    But than also same error is coming.

    I went to CCS Component manager :

    Name , Installed directory and version was there.

    Than as suggested by you went to command window "C:\CCStudio_v3.3\c2000\cgtools\bin" path typed regsvr32 bti2000.dll following message came :

    "Dllregister server in bti2000 succeeded"

     

    Kindly help

    Prashant

    M/S B.H.E.L.

  • 0 in reply to Prashant15714
    TI__Guru**** 173310 points

    Prashant,

    Does the compiler run from a command line? That is, can you open a command window, go the folder where the compiler executables are, and type cl2000 and see if that works? If this works, there could be something corrupted in the CCS installation, and you may need to uninstall and reinstall CCS.

    If this is the only version of CCS you have installed on this PC, you want to make sure to clean out the registry after uninstalling CCS through Windows Add/Remove Programs. Please refer to this FAQ on which registry entries to remove: http://tiexpressdsp.com/wiki/index.php?title=CCStudio_FAQ#Q:_When_upgrading_to_newer_versions_of_Code_Composer_Studio.2C_how_do_I_clean_the_Windows_Registry.3F