How to run automatically external console application before build the ccs project

Lech Zagozdzinski

Hi,

I need automatically run the simple exe program before the build of ccs application on windows platform. I think, I should use the pre-biuld steps window to configure the option but how to do it. The ccs help give only perfunctory information.

Regards,

Lech

over 11 years ago

0 Ki over 11 years ago

TI__Guru**** 472661 points

Hi Lech,

You can set this in the project properties:

Thanks

0 Lech Zagozdzinski over 11 years ago in reply to Ki

Prodigy 200 points

Hi Ki,

It works. But is the possibility to write path relative to the project directory or I have always fill full path?

Thanks

Lech

0 Ki over 11 years ago in reply to Lech Zagozdzinski

TI__Guru**** 472661 points

It's based off the current windows directory. So I believe for the project build, it would be the project configuration subfolder (i.e. 'Debug', 'Release', etc). So if you use relative pathing, it would be from that directory.

0 Lech Zagozdzinski over 11 years ago in reply to Ki

Prodigy 200 points

This exhausts the problem

Thank's

Lech

Code Composer Studio™︎

Code Composer Studio forum

How to run automatically external console application before build the ccs project