CodeSense Not Working

Stephen Mansfield

Hello,

For some reason codesense stopped working on my latest project. I built several projects for the F28027 and codesense worked fine. I just built a F28M35H52C1 project and codesense stopped working. I spent a couple of hours looking for documentation but none of it matches CCS 5.4. I am sure this is a real basic problem but I just can't find any documentation to get me onto first base.

Thanks,

Steve M.

over 11 years ago

0 Ki over 11 years ago

TI__Guru**** 472221 points

Hi Steve,

Did you try rebuilding the index?

See slide 34 of: http://software-dl.ti.com/ccs/non-esd/training/CCSv5-TipsAndTricks.pptx

Thanks

0 Stephen Mansfield over 11 years ago in reply to Ki

Intellectual 465 points

Hello Ki,

I did as you asked -- rebuild index -- but with no luck. By the way, when I type cntl-space I get an empty dialog box that says "No default proposals".

Regards,

Steve M.

0 Ki over 11 years ago in reply to Stephen Mansfield

TI__Guru**** 472221 points

You might want to try running CCS with -clean or use a new workspace folder and see if that helps

http://processors.wiki.ti.com/index.php/Troubleshooting_CCSv5#General_IDE

0 Stephen Mansfield over 11 years ago in reply to Ki

Intellectual 465 points

Hello Everyone,

I rebuilt CCS with the latest CCS5.5. Problem went away. Not sure what the root problem was but it seems ok with CCS5.5

Regards,

Steve M.

Code Composer Studio™︎

Code Composer Studio forum

CodeSense Not Working