F28335 using with MATLAB/Simulink

Taner GOKTAS

Hi ;

i have a new control card that name is F28335.i want to use this control card with simulink..i create a new model that digital ouput and take a pulse generator..Then real tıme workshop / Buıld all ..Buıld ıs complete with 0 errors and 0 warnings But i cant see the signals output pins.

My current versions ;

Matlab R2009a

Code composer stdudio V.3.3

DSP/BIOS 5.02.34

Code generating tools 5.0.2

Service release 8 and Service Release 10 has been uptaded.

What is the problem?

Thanks

over 16 years ago

Matt Middleton over 16 years ago

Prodigy 10 points

I seem to be having the same problem with the same setup at the moment. I haven't worked with the C2000s before now, so I am currently researching the register setup, as controlling a GPIO should be very easy. Did you happen to find a solution to your problem?

Thanks

deepika dgfdfg over 15 years ago

Prodigy 40 points

Hi ,

I need to implement the developed matlab simulink model on to the TMS320F28335 target processor. As a part of it i need to connect the matlab embedded ide link with the ccs IDE 3.3. The targets connected are shown in matlab command window upon typing ccsboardinfo. But by doing so i have come across an error as;

?? error map is empty

error in ==>ccsboardinfo at 64

ccssetup.connect() %connect to ccs setup.

What I am supposed to do to overcome the error please help...

-Deepika.T

Ki over 15 years ago in reply to deepika dgfdfg

TI__Guru**** 474421 points

Hello,

I'd recommend sending any Matlab/Simulink issues to Mathworks support for help.

Thanks

Thiyagarajan . S over 14 years ago in reply to deepika dgfdfg

Expert 2570 points

deepika,

what you tried is correct, but please ensure that your code composer studio is opened and connected to target, then type ccsboardinfo in MATLAB command window......

Thiyagarajan.S

Hernaldo Saldias over 13 years ago

Prodigy 10 points

Hello,

I've had the same problem with Matlab-Simulink.

Maybe the solution is to install this patch

MathWorks - Bug Reports - 521642 - Code generated for C280x™ and C2833x™ processors runs at an unintended location

I hope this can help you

Regards

Code Composer Studio™︎

Code Composer Studio forum

F28335 using with MATLAB/Simulink