Don't CCSv4 accept breakpoint after start debug?

Hi,

When you say that you start debugging and the put a breakpoint on a line of code, do you mean that you run the application first and then try to set a breakpoint while the application is still running? Or is the application halted when you try an set a breakpoint?

Thanks

ki

Yes, I run the application first and then try to set a breakpoint while the application is still running. Like I usually do with CCS3.x.   

The default behavior of CCSv4 has changed in regards to this. Please see this FAQ:

http://tiexpressdsp.com/index.php/FAQ_-_CCSv4#Q:_Why_do_I_get_a_.22Cannot_enable_while_the_target_is_running.22_error_when_I_try_to_enable_a_breakpoint.3F_I_was_able_to_do_this_in_CCSv3.21

Thanks

ki

Thanks very much. Now I'm starting to like CCSv4.   

I’m trying to open the CCSV4 samples projects from  F2803X Header and examples files  version 1.10 (SPRC892), but I don’t know how to do it.

Check the Quick Start readme pdf file contained within. Section 4.1.2 has step by step instructions

ki

There is also a C2000 Getting Started Guide with CCSv4 with lots of great information:

http://tiexpressdsp.com/index.php/C2000_Getting_Started_with_Code_Composer_Studio_v4