Uniflash v3 slow loading program to flash on CC2538DK

Hi Kanas,

Which emulator are you using?

Regards,

Gautam

Hallo,i am using xds100v3 which is embedded in cc2538dk.

XDS100 versions are termed as relatively slow emulators. They do consume some time!

But, is it like previously you experienced them  to be quick and now you feel them slower or its your fresh experience?

Regards,

Gautam

it is my fresh experience.

Then Kanas, XDS100s are supposed to be slow programmers. To overcome this issue; users opt for XDS560 or XDS510 etc...

Regards,

Gautam

XDS100 is slower for sure but I think the bottleneck here is the flashing itself. 3 minutes does seem a bit extreme however. How big are the zstack examples (the actual code being flashed)?

Thanks

ki

The program that i try to load with uniflash is the SampleLight example from zstack home automation examples.

I dont know how many lines is the code but the .bin is about 511KB.

If the program is loaded to the flash(which takes about 2.5min) then the debug is fast enough with IAR embedded workbench.

Hi Kanas, 

I do agree with Mr. Lee; 2.5min is way too much. Around or less than 1min should be enough. 

Yes, 511kb is bit a huge file if compared to regular ones. 

Regards, 

Gautam