Problem with RTA

Ivan TANKOUA

Prodigy 90 points

when i was trying to flash my controlCARD, i got this message

"your RTA version is older ....."

My rta version is 4.9.x and i should have 5.2.x.x

how can i upgrade it ?

over 16 years ago

0 Lori Heustess over 16 years ago

TI__Guru* 92770 points

Moving to CCS forum

0 Ki over 16 years ago

TI__Guru**** 472311 points

Hi Ivan,

If you are using CCS 3.1 or greater, you can download a standalone version of BIOS from this link:

http://software-dl.ti.com/dsps/dsps_registered_sw/sdo_sb/targetcontent/bios/index.html

And the use the CCS Component Manager to have CCS use the new BIOS install

Thanks

0 desouza over 16 years ago in reply to Ki

TI__Guru**** 171309 points

Ivan,

Just adding to Ki's response, please make sure to download the correct version for your CCS.

If using CCS 3.1, download DSP/BIOS up to 5.20.05.

If using CCS3.2 and 3.3 you can download 5.21.02 through the latest 5.33.06.

Despite this, you can still build your project in CCS3.1 using a DSP/BIOS release 5.21.02 and newer, but the RTA tools will not work (which is precisely what you want). Also, make sure to check the section Validation Information on the release notes to make sure you are using a tested combination of compiler/assembler/linker with the selected DSP/BIOS release.

Hope this helps,

Rafael

Code Composer Studio™︎

Code Composer Studio forum

Problem with RTA