This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCSv4 and Flash 28xx plugin

Other Parts Discussed in Thread: TMS320F28335

Good day.

I download and install CCSv4 beta 5. Import my proget from CCS3.3 and compile it.

Now a dont know how create Taget config for my F28335 device. In CCS3.3 i have Flash Plagin and F283xx emulator config

In CCSv4 a coudnt find F283xx emulator  only simulator.

If you are now that files i need and what I can do, please help.

I am from Russia, I constracting hybrud drive system.

my email is evvale@yandex.ru and skype nik  is on4ip84

  • The QuickTips page on the mediawiki site has some video captures you can watch on creating target configurations: http://tiexpressdsp.com/index.php/Quick_Tips#Target_Setup

    Basic info below.

     

    If you are have a project right click on your project and select New-> Target Configuration File (if you are not using a project go to the Target menu and select New Target Configuration

    Enter a name for your file

    Click finish

    The target configuration editor will now open

    In the connection drop down select the emulator you are using (i.e. something like Spectrum Digital XDS510USB Emulator)

    Next you select your device, you can just type 28335 in the filter box and it will filter the device list down to two entries.  TMS320F28335 and EZDSPF28335.  If you are using the eZdsp board from Spectrum select it, otherwise select TMS320F28335.

    Click the save button.

    You can now launch the debugger with this configuration. 

    As for flash programming CCSv4 automatically programs the flash for you.  There is a video capture of this on the quick tips pages as well: http://tiexpressdsp.com/index.php/Quick_Tips#Flashing.C2.A0

     

    Regards,

    John